Applications
All applications served by either a reciprocal (linear motion) or orbital motion shaking water bath including growing mammalian and bacterial cell cultures. A wide range of controlled temperature shaking protocols can be achieved with this most versatile shaking bath.
Features
- Easy change from one motion to the other, simply by changing orientation of the tray
- Universal tray accessory accepts virtually any vessel while eliminating the need for expensive clamps
- Adjustable speed and stroke length to optimize agitation for your application
- Digital setting and display of temperature and shaking speed for reproducibility of process
- Space saving design
- Quiet operation
- The shaker trolley is operated by a magnetically coupled driver
- Drain for easy emptying
- All immersed parts made from corrosion resistant materials and are removable for easy cleaning
- Concise operating instructions are printed on outer case for permanent reference
- Three year warranty
- The ORS-200 must be equipped with a Tray Accessory to be functional
Universal Flask Tray
- Stainless steel tray utilizes a high density spring lattice network to secure glassware
- Holds flasks from 25 mL to 1 liter in size
- Springs are adjustable for maximum flask capacity and springs can be removed to accommodate awkward shaped vessels like “sandwich boxes” for hybridization for example.
- The strong springs ensure fast securing of the glassware, white allowing easy insertion and removal
- The universal tray can accommodate a combination of different flasks, or single size Erlenmeyer flasks as follows:
26 x 25 mL, 26x50mL, 15 x 100 mL, 11 x 250 mL, 6 x 500 mL, 3 x 1L
Test Tube Tray
TT200 test tube tray holds 5 Model HI test tube racks
| Rack |
Capacity |
| HI-10 |
48 x 10mm tubes |
| HI-13 |
44 x 13mm tubes |
| HI-16 |
24 x 16mm tubes |
| HI-19 |
21 x 19mm tubes |
| HI-25 |
12 x 25mm tubes |
| HI-30 |
10 x 30mm tubes |
Perforated Tray
The Model PF-200 perforated tray replaces the trolley, providing a platform on which vessels or racks can be placed, for use as an unstirred thermostatic bath.
Heat Exchange Coil
The Model CW-200 heat exchange coil is designed to be attached to a supply of cooling tap water or a refrigerated circulator. It can be used down to 2°C above the temperature of the coolant. The coils fit underneath the shaking tray.
Immersion Cooler
The Model CS-200 immersion cooler is a refrigerated cooler, the coil fits underneath the shaking tray. Cooling rate will depend on the ambient temperature, the supply voltage and the volume of liquid used.
Lid
The Model LS-200 lid is recommended for use above 60°C and below room temperature. The stainless steel gabled lid directs condensate to the edges of the bath to prevent it from dripping into open flasks.