Water Purification, Smart2Pure™ Pro System, Barnstead®
You have not viewed any products recently.
View Larger
Water Purification, Smart2Pure™ Pro System, Barnstead®
Smart2Pure™ Pro Water Purification System
The Smart2Pure Pro system is a compact system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30L or 60L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water.
Lasting economy
- Water purification progresses through independent cartridges with Aquastop quick connects for fast replacement
- Module 1 reverse osmosis catridges to remove up to 99% of tap water impurities
- Module 2 includes a polishing cartridge that contains high-quality ultrapure resin for consistent purity and long cartridge life
Easy-to-operate
- Dispensing is easy and features variable speed to control flow
- The display can be tilted for optimal reading
- Simplified User Interface
Placement Options
- Position on laboratory bench
- Mount it on the wall
Smart2Pure Pro offers reservoir options, either 30 or 60L
- Large opening allows easy and effective cleaning by hand
- Sterile venting filter/reservoir overflow protects against contamination by microorganisms
- Optional CO2 absorber prevents TOC value increases from drawn-in CO2
- Polyethylene reservoir is opaque to light
- Recirculation pump protects the high purity water from bacterial growth during standstills and maintains the low conductivity value
- Wall-mount is optional for simple space-savings
- Conical bottom outlet allows for complete draining and efficient cleaning and disinfection
Optional Hand Dispenser
- Gain increased flexibility by adding a hand dispenser with 3 meter cord (D626-92)
Promotional pricing valid on purchases January 1 through June 30, 2024
- Automatic Standby mode when system is not in use recirculates water through system to maintain purity
- Leak detector shuts off water supply and system if leak is detected
- Alerts show on display when to replace consumables
- Reverse osmosis water quality monitoring
- Inline ultrafilter with large surface area to remove endotoxins and nucleases.
- System parameters are code-protected to prevent accidental changes to set points
| |
D626-63 |
D626-64 |
| Tank Size |
60L |
30L |
| Product Water Type |
Type 1 and Type 2 |
| Conductivity |
Type 1: 0.055µS/cm and Type II: 0.067 to 0.1µS/cm |
| Feedwater Source |
Tap Water |
| Flow Rate |
Up to 1L/min |
| Total Organic Carbon |
1 to 5 ppb |
| Bacterial Content |
<0.01 CFU/mL |
| Particles >0.2µM/mL |
<1 |
| TOC Monitor with UV Intensity Monitoring |
No |
| Feedwater Connector |
3/4 inch NPT and 1/2 inch NPT |
| Feedwater Pressure |
1-6 Bar |
| Size (H x W x D) |
545 x 305 x 300mm |
| Operating Pressure |
1 to 6 bar |
| Bacterial retention |
0.99 |
| Permeate performance |
16L/hr. at 10°C |
| Power Consumption |
0.12kW |
| Weight |
22kg |
| Electrical Requirements |
100-240V / 50/60Hz |
| Feedwater Monitoring |
No |
| Includes |
Complete system includes RO/pretreatment cartridge, an ultrapure polisher cartridge, sterile 0.1 µm filter, UV lamp, UF filter, tank, CO2 vent filter, sterile overflow and system wall bracket |